1280x325_ConvertIP-BMG_new-message_edited-1

The ConvertIP Future-Proof Solution 

The new Matrox® ConvertIP standalone ST 2110 converters allow you to get the most out of your existing installation—and extend and expand it over time—by providing automatic routing, monitoring, and distribution of HDBaseT, IPMX, and SMPTE ST 2110 signals over IP. 

Matrox ConvertIP Series
AT A GLANCE

Transmitter or receiverTransmitter or receiver device

 

55x55px_4K-image-quality4K image quality with ultra-low latency

 

IPMX readyIPMX-ready

 

Compressed or uncompressedCompressed or uncompressed workflows from 1G to 25G

Web interfaceWeb interface for management of ConvertIP devices

Signal routing platformConductIP signal routing platform for management of content

How ConvertIP optimizes your current infrastructure  

400x225_Interoperability_darkblue_1221

Interoperability

Tailor AV-over-IP installations by choosing the best, most suitable technologies that integrate seamlessly with other manufacturer products and platforms. 

400x225_cost_darkblue_1221

Cost

Leverage existing installations and seamlessly integrate new technologies on a future-proof platform—without the need to re-invest in your AV-over-IP backbone. 

400x225_gscalability_darkblue_1221

Scalability

Support today’s and tomorrow’s emerging applications backed by a modular AV-over-IP architecture with limitless scaling capabilities. 

ConductIP

Your Entire Media Installation at a Glance

ConductIP is a standards-based signal routing platform that seamlessly integrates into a ConvertIP or any other IPMX-enabled network. ConductIP gives you a comprehensive view of all content on your IP network and where it is being routed, while allowing you to intuitively organize devices in your unique setup.

What ConvertIP Product is Right for You?

  • ConvertIP SRST

  • ConvertIP SRH

  • ConvertIP DRH

  • ConvertIP DSH

  • ConvertIP DRS

  • ConvertIP DSS

ConvertIP SRST

Single-channel RJ45/SFP HDBaseT™-to-IP converter 

Matrox ConvertIP SRST is capable of receiving or transmitting HDBaseT™ signals, and features both RJ45 and SFP28 ports on a single device. 

ConvertIP SRH

Single-channel RJ45 HDMI-to-IP converter 

Matrox ConvertIP SRH is capable of receiving or transmitting ST 2110 or IPMX signals, and features one RJ45 port.  

ConvertIP DRH

Dual-channel RJ45 HDMI-to-IP converter 

Matrox ConvertIP DRH is capable of receiving or transmitting ST 2110 or IPMX signals, and features HDMI I/O and three RJ45 ports on a single device.  

ConvertIP DSH

Dual-channel SFP HDMI-to-IP converter 

Matrox ConvertIP DSH is capable of receiving or transmitting ST 2110 or IPMX signals, and features HDMI I/O, one RJ45, and two SFP28 ports on a single device.  

ConvertIP DRS

Dual-channel RJ45 SDI-to-IP converter 

Matrox ConvertIP DRS is capable of receiving or transmitting ST 2110 or IPMX signals, and features 12G-SDI, genlock, and three RJ45 ports on a single device.  

ConvertIP DSS

Dual-channel SFP SDI-to-IP converter

Matrox ConvertIP DSS is capable of receiving or transmitting ST 2110 or IPMX signals, and features 12G-SDI, genlock, one RJ45, and three SFP28 ports on a single device.